Available Finishes: Walnut, Cherry, Oak Complementary Products: DB1i, TB2i, GB1i, FB1i, OB1i Crossover Frequency: Bryston designed amplifier Section: 150W RMS, Power bandwidth 1Hz 100kHz, Signal to noise 90dB ref. 0dBu, Power consumption 160W, Roll off Freq variable 40Hz-155Hz @ 12dB/Oct
Dimensions: H 550mm 21.6" W 200mm 7.80" D 545mm 21.5" + Grille Distortion: <0.0095 from 20Hz 20kHz full o/p
As per the original, the V-DAC II is powered by a 12V DC power supply and features a 24-bit 192k DAC (digital to analogue converter), offering true upsampling, along with flexible inputs for all of your digital sources, with Coax, Optical and USB digital inputs, along with standard stereo RCA outputs.
The technical performance of the V-DAC II is in a word sensational. There is no magic or hocus pocus here, nor is this simply clever marketing. Musical Fidelity offers this high level of performance simply by using state-of-the-art digital components, circuitry and layout, along with no additional expenditure on over the top packaging or other wastage. It's basically like a fine tuned racing car - functional with no excess weight/expense!
The existing V-Link has gained reputation for extraordinary technical performance and incredible value for money.
The V-LINK192 is for ultra high resolution 24-bit 192 kHz USB. Up to now this has been the territory for very expensive asynchronous devices. The new V-Link192 offers true 24-bit 192 kHz asynchronous performance at an outstandingly competitive price.
The new V-Link192 offers outstanding technical performance. It has both COAX and fully balanced digital outputs. Both are fully galvanically isolated.
Additionally, the V-Link192 has input frequency LEDs (similar to the M1 DAC) which indicate the following frequencies:
44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz
The V-LINK192 has a multi-coloured LED array:
Blue: Power Green: Lock Yellow: 44 kHz, 48 kHz and 88.2 kHz Orange: 96 kHz and 176.4 kHz
Product: M1 DAC Output impedance 47 ohms Output, digital 0dB level RCA output - 2.2V r.m.s. nominal (RCA) 4.4V (XLR) DAC DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling to 192kHz Total correlated jitter <12 picoseconds peak to peak Linearity <0.1dB down to -96dB Frequency response 10Hz to 20 kHz -0.1dB max. Channel separation >105dB 20 Hz to 20 kHz Signal to noise >119dB A- wtd. Total harmonic distortion <0.0025% 10Hz to 20 kHz Connections Line level outputs 1 pair line level RCA (phono), left and right 1 pair line level XLR (balanced), left and right Digital inputs 1 XLR AES balanced digital input 1 RCA coaxial connector SPDIF 32-192 kbps (16-24 bit stereo PCM) 1 TOSLINK optical connector 32-96 kbps (16-24 bit stereo PCM) 1 USB type B connector for computer/PDA 32-48 kbps Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption 10 Watts maximum Weight Unit only, unboxed 3.4 kg (7½ lbs) In shipping carton & inc. accessories 4.1 kg (9 lbs) Dimensions Wide 220 mm (8⅔) High, including feet 100 mm (4) Deep (front to back) including terminals 300 mm (12)
Products : M1HPA Output Output Power 1.1W into 32Ω Output impedance less than 1Ω Output level 5.2V rms max Frequency response 15Hz to 75kHz -3dB max. Signal to noise >109dB A- wtd Total harmonic distortion <0.008% 10Hz to 20kHz Connections Line level input 1 pair RCA line in left and right Line level outputs 1 pair RCA line out left and right 1 pair RCA pre-out left and right Digital input 1 USB type B connector for computer/PDA Power requirement Mains voltages 90-250VAC 50/60Hz Consumption 25 Watts Weight Unit only, unboxed 3.4 kg (7½ lbs) In shipping carton & inc. accessories 4.1 kg (9 lbs) Dimensions Wide 220 mm (8⅔) High, including feet 100 mm (4) Deep (front to back) 300 mm (12) including terminals
The M1 ViNL is a state of the art MM/MC phono stage with adjustable input capacitance, input resistance and RIAA/IEC equalisation curves with single ended and balanced outputs.
The M1 ViNL has extraordinary input flexibility. On MM it has 47k or 68k input impedance. Input capacitance has seven values; 50PF, 100PF, 150PF, 200PF, 250PF, 300PF, 350PF, 400PF. This extraordinary flexibility means perfect matching for almost any MM cartridge.
The MC stage has ultra flexible input resistance switching, 10R, 18R, 25R, 50R, 100R, 200R, 400R, 800R, 1600R and 47K.
The ViNL has switchable RIAA and IEC EQs.
The ViNL has another important feature; you can switch resistance, capacitance or equalisation curve whilst it is playing. This gives ViNL extraordinary flexibility and functionality.
And that's just the beginning! The ViNL's technical performance is no compromise, state of the art. The circuitry is based around our revered KW phono stage but, with modern technology, a setup from that incredible standard. We employ ultra low noise instrumentation amplifiers (the highest quality available). The RIAA EQ curve extends up to 50 KhZ within 0.2 dB. Distortion is almost non-existent and the noise is on the threshold of what can be achieved. The crosstalk is outstanding. In every technical parameter, the ViNL is state of the art.
The ViNL's incredible input flexibility and state of the art technical performance, result in an extraordinary product. As far as we can see the only problem is that it may not be expensive enough to be believable!
Audio Signal to Noise Ratio: >119dB A- wtd. THD(+ noise): <0.0025% 10Hz to 20 kHz Frequency Response: 10Hz to 20 kHz -0.1dB max.
Inputs 4x RCA / Phono Line Level 2x RCA coaxial SPDIF 32-192 kbps (16-24 bit stereo PCM) 1x TOSLINK optical connector 32-96 kbps (16-24 bit stereo PCM) 1x Front mounted USB type A socket for USB pen/hard disk drive 1x Rear mounted USB type A socket for iPod® or iPhone® USB lead (Does not support Apple Dock) 1x USB type B connector for computer/PDA 32-48 kbps 1x UTP RJ45 10/100Mbps socket (wired network connection) 1x Wifi Aerial input (wireless network connection) 802.11b/g
Outputs 1x Line level RCA (phono) 1x Fixed outputs, not controlled by volume at 0dB (same source as main out) 1x Pre-amp out 1x Trigger output 1 3.5mm Jack socket +12V
General Dimensions - WxHxD (mm): 220 x 100 x 300 Weight (unpacked / packed): 3.3 kg/ 4.5 kg
Performance Power output: 1000 Watts per channel into 8 Ohms (30 dBW) THD(+ noise): <0.008% typical Signal to Noise Ratio: >126dB Frequency Response: +0, 0.5dB, 20Hz to 20kHz
Inputs 1x RCA Phono Line Level 1x Line level XLR Balanced
General Dimensions - WxHxD (mm): 483 x 185 x 635 (Amplifier) - 483 x 185 x 615 (Power Supply) Weight (unpacked / packed): 45 kg / 50 kg (Amplifier) - 68 kg / 75 kg (Power Supply
PRO 50 MkII Specifications : 120 watt MOSFET Amplifier Speaker and Line Level inputs with Gain Control Range 80 and 60dB Neutrik Speakon connector (High level 100k ohm) Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm) Twin Sophisticated Crossover Circuits - variable increments between 20Hz and 120Hz LFE Bypass setting which opens crossover to 200hz on line level input Phase Control infinitely adjustable between 0º and 180º Frequency response 13hz to 200hz * I.S.P. ( Intelligent Speaker Protection) Specially designed cabinet structure, volume, and configuration made from inert 18 MDF Switched fused IEC mains input socket 250mm (10) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets UK 2 year manufacturers return to base warranty Dimensions (WxHxD ) 280mm X 320mm X 280mm * Weight 11.55kg (25.46 lbs) Black Satin Paint finish as standard
Specification 150watt MOSFET Amplifier Speaker and Line Level inputs with Gain Control Range 80 and 60dB Neutrik Speakon connector (High level 100k ohm) Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm) Twin Sophisticated Crossover Circuits - variable increments between 20Hz and 120Hz LFE Bypass setting which opens crossover to 200hz on line level input Phase Control infinitely adjustable between 0º and 180º Frequency response 10hz to 200hz * I.S.P. ( Intelligent Speaker Protection) Specially designed cabinet structure, volume, and configuration made from inert 18 MDF Switched fused IEC mains input socket 300mm (12) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets UK 2 year manufacturers return to base warranty Dimensions (WxHxD ) 280mm X 383mm X 345mm * Weight 15.1kg (33.4 lbs) Black Ash real wood veneer Painted finish as standard
250watt MOSFET Amplifier Speaker and Line Level inputs with Gain Control Range 99dB Neutrik Speakon connector (High level 100k ohm) Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm) Twin Sophisticated crossover circuits - variable increments between 20Hz and 120Hz LFE Bypass setting (effective roll off set at 200hz) 12 volt trigger Remote Control with out-of-sight RM Eye and 4 user-presets Phase Control infinitely adjustable between 0º and 180º * Frequency response 13hz to 200hz D.I.P. (Dynamic Intelligent Protection) D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation) Specially designed cabinet structure, volume, and configuration made from inert 18 & 25mm MDF Digital Display with power output meter and frequency setting Switched fused IEC mains input socket 300mm (12) Ultra Long-throw Driver with Heavy Duty Chassis & Double Magnets UK 3 year manufacturers return to base warranty Dimensions (WxHxD ) 345mm x 385mm x 345mm * Weight 16.23kg (35.2 lbs) finishes available, Black Ash, Cherry, Oak & Walnut. All Real Wood Veneers.
Reference 800 Mk II Specifications: 600watt Discete Instant High Current MOSFET Amplifier Speaker and Line Level inputs with Gain Control Range 99dB Speakon type connector (High level 100k ohm) Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm) Balanced XLR Input and loop out Twin Sophisticated Crossover Circuits - variable increments between 20Hz and 120Hz LFE Bypass setting Phase Control infinitely adjustable between 0º and 180º Frequency response 10hz to 200hz D.I.P. (Dynamic Intelligent Protection) D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation) Specially designed cabinet structure, volume, and configuration made from inert 30mm MDF Digital Display with power output meter and frequency setting Remote Control with 4 user definable memory pre-sets Switched fused IEC mains input socket 460mm (18) Ultra Long-throw Radial Driver with Heavy Duty cast Radial Alloy chassis & High intensity Magnet with Triple suspension UK 1 year manufacturers return to base warranty Dimensions (WxHxD ) 520mm X 520mm X 558mm Weight 56kg (123.48lbs) Real Wood Ash Veneer with Satin Back paint overlay available
XENO XM1 Specifications HF (high frequency) Unit: 25mm Textile soft dome - Neodymium Magnet damped (magnetically shielded) MF/LF (mid/low frequency)Unit: 150mm paper pulp diaphragm cone with a 30mm high power magnetic voice coil and rubber surround.(magnetically shielded) Crossover: 5 element high power handling filter circuit. 12dB per octave slope at 2kHz high grade chokes and class A capacitors Power handling: Amplifiers up to 100 watts Sensitivity: 91dB 1W/1m @ 1kHz Impedance: Typically 4 ohms @ 1kHz Frequency Range : 48Hz-13kHz Cabinet: Precision engineered low resonance reflex enclosure - 15mm high density MDF. Luxury two pack multi coated Gloss paint Terminals:Gold plated 4mm coded binding posts Gloss Black Finish Dimensions : 180 x 260 x 210 mm. Weight : 3.4 Kg.
Specifications: HF (high frequency) Unit: 25mm Textile soft dome - Neodymium Magnet damped (magnetically shielded) MF/LF (mid/low frequency)Unit: 150mm paper pulp diaphragm cone with a 30mm high power magnetic voice coil and rubber surround.(magnetically shielded) Crossover: 5 element high power handling filter circuit. 12dB per octave slope at 2kHz high grade chokes and class A capacitors Power handling: Amplifiers up to 120 watts Sensitivity: 91dB 1W/1m @ 1kHz Impedance: Typically 4 ohms @ 1kHz Frequency Range : 48Hz-13kHz Cabinet: Precision engineered low resonance reflex enclosure - 15mm high density MDF. Luxury two pack multi coated Gloss paint Terminals:Gold plated 4mm coded binding posts Gloss Black Finish Dimensions : 430 x 180 x 210 mm. Weight : 6.1 Kg.
Specifications: H x W x D 640mm x 570mm x 400mm 10mm shelves - 50kg Maximum weight Standard Shelf Spacing - 150mm Shelf Spacings Available - 150mm or 200mm ( 200mm spacing £40 extra per shelf ). Internal width 480mm Glass finish available Clear or Black Hardwood finishes available include: Natural, Oak, Cherry, Mahogany, Walnut or Black
Specifications: H x W x D 750mm x 660mm x 420mm Shelf Spacing Adjustable 6mm Clear or Black Glass 4 Shelves 560mm x 370mm Supplied with 4 iRAPs standard 400mm x 300mm Legs manufactured from Solid Ash, Oak or Walnut
Specification : H x W x D 585mm x 525mm x 400mm Shelf spacing 175mm - Other spacings available 100mm, 125mm, 200mm, 225mm or 250mm on request. Support finishes available: Black, Mercury, Chrome, Brushed Chrome or Gold finish. Image Above: Discrete Hi-Fi 4 in Chrome with Clear Glass finish.
Products : Milan LCD Corner 3 Audio Visual Support
ราคา 22,000 บาท / Set.
HH x W x D 425mm x 800mm x 400mm Standard Shelf Spacing - 155mm with isolation spikes Shelf Spacing Available - 105mm - 155mm - 200mm - (200mm spacing £40 extra per shelf) - 250mm - 300mm (add on spacers £99.99 per pair) Internal width 690mm Glass finish 6mm Clear or Black - 25kg Maximum Weight per shelf. Finishes available include: Natural, Oak, Cherry, Mahongany, Walnut or Black
H x W x D 690mm x 500mm x 400mm Shelf Spacing 155mm Top shelf will support 30kg 4 shelves 465 x 365 x 6mm Clear or Black finish. Side Supports available in Oak, Natural or Havana finish. Crossbars available in Mercury or Black and Chrome, Brushed Chrome or Gold optional extra.
H x W x D 480mm x 1015mm x 410mm 10mm shelves - 50kg Maximum weight Standard Shelf Spacing - 150mm Shelf Spacings Available - 150mm or 200mm (200mm spacing £40 extra per shelf) - 250mm - 300mm (add on spacers £99.99 per pair). Internal width 925mm Glass finish available Clear or Black Hardwood finishes available include: Natural, Oak, Cherry, Mahogany, Walnut or Black
H x W x D 525mm x 1070mm x 440mm Shelf Spacing Adjustable Top Shelf Support 50Kg 3 Shelves 975mm x 370mm x 6mm Glass shelves available in Clear or Black finish Support leg finishes available in Solid Oak or Ash hardwoods, Cherry and Black
At Custom Design we offer our customers value and believe the most successful companies are those who forge a strong relationship with their customers. The Ultra 42 Audio Visual Range offers innoative solutions for our customers with specific demands. The New Ultra 42 Range are 1100mm(W) x 450mm(D), the Ultra 42 / 2 shelf with shelf spacing of 225mm produces a viewing height of 350mm(H), the Ultra 42 / 3 shelf with shelf spacings of 175mm produces a viewing height of 400mm(H), different spacings are available on request. The 8mm toughened clear or black glass shelves are capable of supporting 50kg without compromise. Finishes available include Mercury, Black, Chrome, Brushed Chrome and Gold which help make the New Ultra 42 Range are a very practical, modern alternative design. At Custom Design we understand how important it is to conceal cables and have designed a discrete £29.99 optional extra cable tidy with complimenting finish
At Custom Design we offer our customers value and believe the most successful companies are those who forge a strong relationship with their customers. The Ultra 42 Audio Visual Range offers innoative solutions for our customers with specific demands. The New Ultra 42 RT Range are 1100mm(W) x 450mm(D), the Ultra 42 / 2 shelf with shelf spacing of 225mm produces a viewing height of 350mm(H), the Ultra 42 / 3 shelf with shelf spacings of 175mm produces a viewing height of 400mm(H), different spacings are available on request. The 10mm toughened Grey or Black top glass shelves are capable of supporting 50kg without compromise. Finishes available include Mercury, Black, Chrome, Brushed Chrome and Gold which help make the New Ultra 42 RT Range a very practical, modern alternative design.
H x W x D 605mm x 1130mm x 510mm Top shelf spacing 200mm and base spacing 330mm with 2 adjustable shelves 10mm Top Shelf Supports 60Kg ( BS 6206 ) All other shelves 6mm - 2 x 1130mm x 510mm with 2 Adjustable shelves 465mm x 365mm ( BS 6206 ) Glass shelving available in Clear or Grey finish
H x W x D 440mm x 595mm x 415mm Shelf Spacing is adjustable with maximum space of 400mm Top Shelf Support 40Kg 6mm Clear or Black Glass 2 Adjustable internal Shelves 465mm x 365mm
H x W x D 640mm x 595mm x 415mm Shelf Spacing is adjustable with maximum space of 600mm Top Shelf Support 40Kg 6mm Clear or Black Glass 2 Adjustable Internal Shelves 465mm x 365mm
Top Plate dimensions 165 x 180 x 4mm - custom sizes available Top isolation pads supplied as standard Base Plate dimensions 220 x 260mm M8 Base isolation spikes supplied standard Available height 610mm (24")
Specification : RS 302 Speaker Stands have Acoustic Top Plates supplied standard. Top Supports are 165 x 180 x 4mm - custom sizes available Base plinth dimensions 220 x 260mm Base plinth available in Steel Mercury or Black finish or 6mm Clear Glass Base isolation spikes supplied standard M8 Available heights 510mm (20") and 610mm (24")
Specification : SQ 402 Speaker Stands have Acoustic Top Plates supplied standard. Top Supports are 190 x 280 x 4mm - custom sizes available Base plinth dimensions 220 x 260mm Base plinth available in Steel Mercury or Black finish or 6mm Clear Glass Base isolation spikes supplied standard M8 Available heights 510mm (20") and 610mm (24")
Specification : SQ 402 Speaker Stands have Acoustic Top Plates supplied standard. Top Supports are 190 x 280 x 4mm - custom sizes available Base plinth dimensions 220 x 260mm Base plinth available in Steel Mercury or Black finish or 6mm Clear Glass Base isolation spikes supplied standard M8 Available heights 510mm (20") and 610mm (24")
SQ 404 Speaker Stands have Acoustic Top Plates supplied standard. Top Supports are 165 x 180 x 4mm - custom sizes available Base plinth dimensions 220 x 260mm Base plinth available in 6mm Steel Mercury or Black finish or 8mm Clear Glass ( BS 6206 ) Base isolation spikes supplied standard M8 Available height 610mm (24")
SQ 404 Walnut Speaker Stands have Acoustic Top Plates supplied standard. Top Supports are 165 x 180 x 4mm - custom sizes available Base plinth dimensions 220 x 260mm Base plinth available in 6mm Steel Mercury or Black finish or 8mm Clear Glass ( BS 6206 ) Base isolation spikes supplied standard M8 Available height 610mm (24")
Specifications: - Color: Black, White - Efficiency: 87 dB / W / m - Impedance: 6 Ohm - Max power: 30 w - Dimensions H x W x D: 208 x 129x 188mm - Weight: 5.5 kg/pair
Specifications: - Color: Black - Max Output Power: 35W x 2 - 2.4G Wireless USB - Frequency Response: 20-20KHz (±1.5dB)
 - Impedance: 4 Ohm, 8 Ohm. 
 - Power Supply: AC220~240V/50~60Hz - Dimensions: L260 x W180 x H130
 - Weight: 5 kg - The Tube Used: 6N1 x 1.6N2 x 1
Specification : - Johnblue Interconnect cable is created to form a high performance - Three-layer shielding for improved noise insulation - Insulation/Dielectric: Special-grade air-foamed polyethylene - Gold-plated RCA plugs - Shielded with 0.12 mm conductor wire Braid realizing superior noise isolation - Beautiful nylon protective sleeve - Sheath : Flexible PVC - Overall Diameter : 9.5 mm - Offered in standard lengths of 1.5M and 0.75M - Custom lengths available as a special order - JohnBlue LC-3S cables are an excellent choice when high resolution combined with rugged construction and moderate price are called for.
Specification : - JohnBlue PC100 was simply designed to extract the maximum potential from silver-plated copper.The traditional balanced type wire structure would be welcomed by not only audiophiles but also sound professionals. - Three-layer shielding for improved noise insulation - Material: Silver-plated HOFC - Insulation/Dielectric: Special-grade air-foamed polyethylene - JohnBlue Gold-plated RCA plugs - Shielded with 0.12 mm conductor wire Braid realizing superior noise isolation - Sheath : Flexible PVC - Overall Diameter : 9 mm - Offered in standard lengths of 1.5M and 0.75M - Custom lengths available as a special order
Specification : - Employing various specification stranding as signal conductor andusing special construction design to ensure signal fidelity in transmission from low frequency to high frequency - Construction: OFC - Insulation: Polyethylene(PE) - Sheath: Flexible PVC - Color: Blue - Beautiful nylon protective sleeve - Overall Diameter: 11 mm (12 AWG) / (3.21sq.mm x 2C) - Gold-plated copper banana plug or Gold-plated copper Y shape plug - Offered in standard lengths of 3.0M - Custom lengths available as a special order
Specification : - Consisting of Sixteen individual TCSS conductors,arranged in a large format braid - Construction : OFC - Insulation: Polyethylene(PE) - Color : (8xBlack)(8xTranslucent) - Overall Diameter: 9 AWG x 2 - Gold-plated copper banana plug or Gold-plated copper Y shape plug - Offered in standard lengths of 3.0M - Custom lengths available as a special order
Receptecle Model: JB625x2 POWER DISTRIBUTOR PSC-4 Based on ultra-low noise design, uses aerospace-level , Aluminum which is the best solution of noise prevention.
Receptecle Model: JB625x2 Internal Wires (Sliver) 142 x 3 Screw Stainless Steel x 4 AC-SWITCHCRAFT 4 rubber cushion Size : D170 x W120 mm
CD Mat IMaterial and its texture resemble that of Seaweed/Moss. (Durable and lasting) It on top of your cd disc while playing in the cd player. You can be sure of a rewarding sonic experience. Hear what you have been missing and find the magic in the details.
Character : Realistic presentation of recorded signals. Vocals are engaging, involving and delivered with warmth and emotion. A stronger and more coherent soundstage. Definition and a touch of elegance to the music.
Audio Signature : Highs are extended and airy. Mid range, particularly vocals and woodwinds are enhanced and presented with grip and finesse. Bass attack is packed with punch and delivered with aplomb.
Professional suspension T-cushion High-precision spherical built-in suspension enables to offset upper and lower contact resonance effectively. The material is Aluminum Alloy especially used in aerospace. Different from pointed tip cushions, its base area can make the contact more stable. It is the best choice when utilizing the Hi-End stereo. Specifications: 35x35x25 (mm) 6 pieces in a set
The popular balanced XLR version of our standard interconnect but with added shielding. The sound is beautifully natural, with no harshness that is sometimes associated with silver. The trebles are crystal clear and the mids extremely smooth with a very fast and tight bass end, the kind of characteristics you can only achieve from high purity silver.
Construction Four cores per channel with 0.4mm 99.99+% solid silver conductors in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into two double balanced litz braids for advanced noise suppression and EMF rejection and then shielded by a fifth silver conductor to safely drain any noise. Terminated with Neutrik® silver XLR plugs and soldered with WBT high percentage silver audio solder Finished in a high quality black nylon braid
The popular balanced XLR version of our standard interconnect but with added shielding. The sound is beautifully natural, with no harshness that is sometimes associated with silver. The trebles are crystal clear and the mids extremely smooth with a very fast and tight bass end, the kind of characteristics you can only achieve from high purity silver.
Construction Four cores per channel with 0.4mm 99.99+% solid silver conductors in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into two double balanced litz braids for advanced noise suppression and EMF rejection and then shielded by a fifth silver conductor to safely drain any noise. Terminated with Neutrik® silver XLR plugs and soldered with WBT high percentage silver audio solder Finished in a high quality black nylon braid
This is our flagship cable and offers the best performance possible with what we believe is the best combination of materials and construction resulting in an incredible sounding cable. This really is hard to beat! These interconnects really will bring out the full potential of any equipment and are suitable for lower end and high end systems alike.
Construction Double the number of cores than used in our standard cable with eight cores per channel. Each core is 0.4mm 99.99+% solid silver wire in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into two double balanced litz braids for advanced noise suppression and EMF rejection. Terminated with LOK® Silver locking RCA plugs and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid (black also available on request)
This is the XLR version of our flagship cable and offers the best performance possible with what we believe is the best combination of materials and construction resulting in an incredible sounding cable. This really is hard to beat! These interconnects really will bring out the full potential of any equipment and are suitable for lower end and high end systems alike.
Construction Double the number of cores than used in our standard cable with eight cores per channel. Each core is 0.4mm 99.99+% solid silver wire in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into two double balanced litz braids for advanced noise suppression and EMF rejection and then shielded by a ninth silver conductor to safely drain any noise. Terminated with Neurtrik® silver XLR plugs and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid (black also available on request)
This is the XLR version of our flagship cable and offers the best performance possible with what we believe is the best combination of materials and construction resulting in an incredible sounding cable. This really is hard to beat! These interconnects really will bring out the full potential of any equipment and are suitable for lower end and high end systems alike.
Construction Double the number of cores than used in our standard cable with eight cores per channel. Each core is 0.4mm 99.99+% solid silver wire in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into two double balanced litz braids for advanced noise suppression and EMF rejection and then shielded by a ninth silver conductor to safely drain any noise. Terminated with Neurtrik® silver XLR plugs and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid (black also available on request)
We believe this is the best speaker cable money can buy. With double the number of cores at 16 conductors of 0.6mm silver per channel and our unique repeated litz, this really is the perfect combination of materials and construction techniques. This is one of the very few pure solid silver speaker cables available and even with the shortest available length, over 48m of silver wire goes into making it. Despite the change in conductor diameter, the cable retains all the excellent characteristics as our interconnects with stunning clarity throughout both frequency and dynamic ranges. A bi-wire version is also available splitting each end into 4 terminations. This can be added for £30 by purchasing the bi-wire option below.
Construction Sixteen cores of 0.6mm 99.99+% solid silver conductors per channel in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into four double balanced litz braids which are then litz braided themselves the best possible noise suppression and RF/EMF rejection. Terminated with your choice of LOK® Silver banana plugs or spades (please advise as to your preferred configuration below) and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid
We believe this is the best speaker cable money can buy. With double the number of cores at 16 conductors of 0.6mm silver per channel and our unique repeated litz, this really is the perfect combination of materials and construction techniques. This is one of the very few pure solid silver speaker cables available and even with the shortest available length, over 48m of silver wire goes into making it. Despite the change in conductor diameter, the cable retains all the excellent characteristics as our interconnects with stunning clarity throughout both frequency and dynamic ranges. A bi-wire version is also available splitting each end into 4 terminations. This can be added for £30 by purchasing the bi-wire option below.
Construction Sixteen cores of 0.6mm 99.99+% solid silver conductors per channel in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into four double balanced litz braids which are then litz braided themselves the best possible noise suppression and RF/EMF rejection. Terminated with your choice of LOK® Silver banana plugs or spades (please advise as to your preferred configuration below) and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid
We believe this is the best speaker cable money can buy. With double the number of cores at 16 conductors of 0.6mm silver per channel and our unique repeated litz, this really is the perfect combination of materials and construction techniques. This is one of the very few pure solid silver speaker cables available and even with the shortest available length, over 48m of silver wire goes into making it. Despite the change in conductor diameter, the cable retains all the excellent characteristics as our interconnects with stunning clarity throughout both frequency and dynamic ranges. A bi-wire version is also available splitting each end into 4 terminations. This can be added for £30 by purchasing the bi-wire option below.
Construction Sixteen cores of 0.6mm 99.99+% solid silver conductors per channel in oversize PTFE Teflon insulation for 99.9% air dielectric. Braided into four double balanced litz braids which are then litz braided themselves the best possible noise suppression and RF/EMF rejection. Terminated with your choice of LOK® Silver banana plugs or spades (please advise as to your preferred configuration below) and soldered with WBT high percentage silver audio solder Finished in a high quality white nylon braid
Using the same construction as our UK mains cables but with the option for either an EU 'Schuko' plug or a US configuration mains plug.
Construction Nine cores of 0.6mm 99.99+% solid silver conductors in oversize PTFE Teflon insulation for 99.9% air dielectric. Three conductors per terminal. Braided into three balanced litz braids which are then litz braided themselves for the best possible noise supression and RF/EMF rejection. On the outlet end is either a cryogenically treated and silver plated Martin Kaiser EU 'Schuko' plug or a silver plated US mains plug. On the equipment side is a cryogenically treated Wattgate 320i IEC for a high quality connection. Finished in a high quality white nylon braid (Black available on request)
Using the same construction as our UK mains cables but with the option for either an EU 'Schuko' plug or a US configuration mains plug.
Construction Nine cores of 0.6mm 99.99+% solid silver conductors in oversize PTFE Teflon insulation for 99.9% air dielectric. Three conductors per terminal. Braided into three balanced litz braids which are then litz braided themselves for the best possible noise supression and RF/EMF rejection. On the outlet end is either a cryogenically treated and silver plated Martin Kaiser EU 'Schuko' plug or a silver plated US mains plug. On the equipment side is a cryogenically treated Wattgate 320i IEC for a high quality connection. Finished in a high quality white nylon braid (Black available on request)
Acostic Top Supports supplied as standard - 165 x 180 x 4mm or 190 x 240 x 4mm Base plate dimensions 220 x 260 x 4mm or 240 x 300 x 4mm Base isolation spikes supplied standard M8 Available heights 510mm (20") and 610mm (24") ( Custom Height available on request) Standard finish: Black - Satilite supports: Black or Chrome, Brushed Chrome or Gold optional extra.