เพิ่มข้อความ : 1
เพิ่มข้อความเมื่อ : 14:34 08/06/2023
NAD C 375 BEE
Features
2 x 150W Continuous Power into 4 Ohms and 8 ohms
200W, 365W, 500W IHF Dynamic power into 8, 4 and 2 ohms, respectively
PowerDrive™ circuit
NAD SR 8 Full System Remote control
Headphone socket
Front panel Media Player (MP) input for attaching portable MP3 Player
Relay Input Switching
Holmgren Toroidal Power transformer
7 Line inputs, including two tape in/outs
All discrete circuitry
Class A Voltage Stages (Preamp and Power Amp)
Distortion Canceling Circuit
BEE Anti-saturation Clamp
Short signal path from input to output
All sockets Gold plated
Tone controls defeat switch
Main-amp input & 2 pre-amp outputs
Speaker A + B outputs and switching
Soft Clipping™
IR Input/Output
12 volt trigger out
RS-232 serial port
Detachable IEC Power Cable
Optional PP375 MC/MM Phono Module
<1W Standby Power Consumption
Free of lead and other environmentally dangerous substances
Note:
The C 375BEE features two MDC slots in the rear so you can comfortably install both an MDC DAC and the inboard PP375 module. The MDC DAC has a selector switch built into the rear panel that allows you to select the Phono module as required. Some early models of the C 375BEE (prior to serial number H08C375BEEG05870) require a different configuration of adding a DAC by using the outboard NAD DAC 1 instead. We recommend you check with your authorised NAD dealer to find the best option that is suitable for your unit and your needs.
Features
2 x 150W Continuous Power into 4 Ohms and 8 ohms
200W, 365W, 500W IHF Dynamic power into 8, 4 and 2 ohms, respectively
PowerDrive™ circuit
NAD SR 8 Full System Remote control
Headphone socket
Front panel Media Player (MP) input for attaching portable MP3 Player
Relay Input Switching
Holmgren Toroidal Power transformer
7 Line inputs, including two tape in/outs
All discrete circuitry
Class A Voltage Stages (Preamp and Power Amp)
Distortion Canceling Circuit
BEE Anti-saturation Clamp
Short signal path from input to output
All sockets Gold plated
Tone controls defeat switch
Main-amp input & 2 pre-amp outputs
Speaker A + B outputs and switching
Soft Clipping™
IR Input/Output
12 volt trigger out
RS-232 serial port
Detachable IEC Power Cable
Optional PP375 MC/MM Phono Module
<1W Standby Power Consumption
Free of lead and other environmentally dangerous substances
Note:
The C 375BEE features two MDC slots in the rear so you can comfortably install both an MDC DAC and the inboard PP375 module. The MDC DAC has a selector switch built into the rear panel that allows you to select the Phono module as required. Some early models of the C 375BEE (prior to serial number H08C375BEEG05870) require a different configuration of adding a DAC by using the outboard NAD DAC 1 instead. We recommend you check with your authorised NAD dealer to find the best option that is suitable for your unit and your needs.
ผู้เพิ่มข้อความ :
ขอนแก่นไฮไฟ
